Laptop Reparing Tools & Accessories

Laptop Rerairing

Laptop Hardware Tools 

 

Screw Driver Kit-This is also a commonly used tool for Laptop repair, If you do not have access to one of these, you can purchase one from your local Auto Parts Store and you will definitely need this kit to allow different sizes for different laptop model repairing  

 

Laptop Casing Opener

 

This is used to open Laptop case. It is commonly and simple but very handy when require.

 

 

 

 

Nose Pillers

Used to hold small parts. Needle-nose provide cutting and holding functionalities to the users. They are useful especially in hardware and electronics repair; because of their pointed needle-like tip, they come in handy if a nut or an element has become stuck in n otherwise unreachable cranny of the motherboard.

 

 

 

Cutter 

Cutters are helpful in stripping and cutting wires as per ones need

 

 

 

 

Electric screw Driver 

An electric screwdriver is a must require material for the computer technician. Various option are available but STP electronic screwdriver might be the best choice for you. It comes with forward and reverse buttons which make the work of a computer technician easy. Apart from this, it is light-weighted and comes with enough torque.

 

 

 

Tweezer 

Used to manipulate small parts of Laptop.

 

 

 

 

Anti-Static Wrist Band 

The antistatic wrist strap protects computers equipment when grounded to a coumpters chassis.

 

 

 

PCB Cleaning Brushes & etc

This believe it or not is the second most used tool in laptop Repairs. Yes. A toothbrush. You will use this on each and every laptop you repair. The toothbrush is used to clean any and all parts and components in and on the laptop. It is used to clean the keyboard, the motherboard and any case part.

 

 

Micro Chips Level Tools

 

Micro Soldering iron

 Its a hand tools used in soldering. it suppliers heat to melt solder so that it can flow into the joint between two work pieces. A soldering iron is composed of a heated metal tip and an insulated handle.

 

 

 

Tip Soldering Iron

User should ‘tin’ both contact before you attempt to solder them. This coats or fills the wires or connector contact with solder so you can easily melt them together. To tin a wire apply the tip of your iron to the wire for a second or two, then apply the solder to the wire.

 

 

 

Hot Air Blower

 Hot Air Blower are used in electronic to desolder and rework surface mounted circuit board components. Hot air guns are also used for functional testing of overheat protection devices, in order to safely simulate an overheat environment.

 

 

 

Magnifying Lenz with Lamp

 Magnifying Lenz with lamp is an important tool for anyone working with percision assembly inspection or design. Because users can views small details, lighted magnifying lamps are very helpful in reducing eye strain and preventing vision fatigue.

 

 

 

Liquid Flux & Dry Flux

 In soldering of metals, flux serves a threefold purpose: it removes oxidation from the surfaces to be soldered, it seals out air thus preventing further oxidation, and by facilitating amalgamation improves wetting characteristics of the liquid solder.

 

 

 

TESTING EQUIPMENT

 

Analog Multi meter

 : A typical multi meter can measure voltage, current, and resistance. Analog multi meters use a micro ammeter with a moving pointer to display readings.

 

 

 

Digital Multi meter

 A digital multi meter, is a devices that can take many types of measurements. It tests the intergrity of circuits and the quality of electricity in computers components. A digital multi meter display the information on an LCD or LED.

 

 

 

Batter Booster

Universal AC adapter 

AC adapter is an external power supply used with devices that run on batteries or have no other power sources. AC adapters help reduce the size of laptop by easing the need for a standard sized power supply.

 

 

 

Debug Card 

 

 

Debug card shows the diagnosis result of the motherboard. Especially helpful to pinpoint where the problem may be when power is on the laptop and you find no display or machine is hantging.

 

 

SATA to USB Convertor 

SATA adapter cable lets you connects a 2.5 “SATA hard drive or solid state drive to your computer through an available USB port — the easiest way to upgrade the hard drive in your laptop by adding an external SSD

IDE to USB CoventorIDE adapter cables lets you connects an IDE or solid state drive to your coumoter through an available USB port.

 

 

OTHER HARDWARE SPARES 

External Monitor: Laptops

 

 

May also have a Display Port that can be used to connect external Monitor that utilize a Display Port cable. If your External display uses VGA, you can also get a DisplayPort  adapter cable, allowing you to connect your VGA display to the laptop.

 

 

External DVD Drive 

 

 compact and portable design, external drives can be placed snugly inside a bag, backpack or purse and simply plug into a laptop or other devices’s USB port to provide a fast data connection.

 

 

USB Keyboard / Mouse etc 

A USB/ wirelesse keyboard & mouse would work with Laptop. If your Desktop keyboard is USB then it should work fine being plugged into your laptop.

 

 

 

ACCESSORIES

Laptop Bag 

 

 Laptop bags have space for carrying your laptop while travelling. It save laptop from damage and dust few of them are also water resistant. There are different variety available in the market.

 

 

LCD Screen Card :

LCD stands for liquid crystal display. screen Card is the technology for display in laptops. LCDs consume less power than LED display beacause it work on the blocking light rather than emitting it.

 

 

LCD Cleaner

 

This is used to clean the dust from the Laptop or Desktop. It is easily available in the market.

 

 

 

Advanced Tools

BGA Rework Machine 

 

Its hot air gun which is used to heat devices and melt solder, and tools are used to pick up and position often tiny components. This work is performed in the rework station, the tools and supplies for this work, typically on a workbench.

 

 

Reballing Kits :

Reballing stands for changing all the Soldered Balls on chip Ball Grid Array Circuit there are a lot of different reasons why we need to reball a chip. Reason could over use of graphic card, BGA chip faulty or over heat.

 

 

 

Infrared IC Heater 

Infrared Ic Heater is a micro-processor controlled reflow oven, works automatically by micro – computer control. It is used to fix bad solder joints, remove or replace bad components and small engineering models.

 

 

 

PCB Scanner 

PCB scanning is scanning of actual printed circuit board with the help of scanner. Scanner generate the BMP image and it is imported in CAM software.

 

 

Oscilloscope ( CRO )

 The Old form of oscilloscope, still used in some labs today , is known as the cathoderay oscilloscope. It produce an image by causing a focused electron beam to travel or sweep in patterns across the face of a cathode ray tube more modern oscilloscopes electronically replicate the action of type CRT using a liquid crystal display similar to those found on notebook  computers

 

 

SMD IC Extractor :

An MD IC extractor is a tool for removing integrated circuits from their sockets. The purpose of this tool is to avoid bending the socket pins.

 

 

 

PTh Desoldering Machine 

 

PTh stands for plated Through Hole. Plated through Hole (PTH) components have leads that pass through holes in the PCB. PTH components are  the easisest to solder by hand. PTH components are larger than SMD components and the leads hold the components in place while soldering. 

Leave a Reply

Your email address will not be published. Required fields are marked *